self adhesive bitumen waterproof tape\band is made of basic material such as SBS, SBR, water soaking agent, good quality of modified bitumen.One surface is bonded with polyethylene film,PET film,HDPE film,colorful aluminum foil;The another surface is covered with anti-adhesion isolating film.Or without film (double-sides with anti-adhesion release films).
surface coating material:colorful aluminum foil,PE film,PET film,PP film,HDPE film,corss laminated polyethylene film, and so on.
width:5cm\7.5cm\10cm\15cm\30cm or customized;
1.Self adhesion ,no leaking ,don't need the torching and bonding agent ,environment friendly.
2.High tensile strength and good elongation ,strong adaptability to substrate shrinkage ,crack and deformation.
3.Strong self healing ability ,and long service life.
4.Excellent flexibility at low temperature.
Do not apply to very cold frosted surfaces. Trim the materials to the required length/shape allowing an overlap of at least 25 cm where the material is to be joined.On stepped flashing begin at the lowest level and work upwards.
Warming the tape using gentle indirect heat will help the adhesion and make the tape more workable in cold temperatures.Ensure that there are no air pockets.Apply even pressure over the entire surface using a non-abrasive tool e.g. cloth or hand roller.Take care not to stretch or puncture the foil during application.
1.Underground waterproof building ,subway ,tunnel ,basement and so on.
2.Industrial and civil building ,swimming pool ,parking lot ,bridge ,reservoir ,canal ,especially used for the waterproof engineering which can not use the open flame.
paper tube inside,then non-stick paper with or without customized logo,shrinked film outside,then carton and packing belt outside;
10-15 days after received your deposit;